Skip to content
Serving Jupiter and nearby cities Mon–Fri: 8 AM–8 PM · Requests accepted 24/7 · (561) 292-1157

Cabinet Painting in Jupiter, FL

The short answer

Cabinet painting makes sense when the boxes are solid wood or quality composite and the layout still works, but the color or finish feels dated. We remove doors and hardware, degrease, sand, prime with a bonding primer and spray or brush durable enamel coats suited to Florida humidity.

Kitchen and bathroom cabinets take more abuse than almost any other painted surface in a house: greasy fingers, steam from the stove, splashes at the sink, and doors that open and close dozens of times a day. In a humid coastal town like Jupiter, they also deal with moisture that can lift a poorly bonded finish. ClearCoat Painting refinishes cabinet boxes, doors and drawer fronts for homeowners in Jupiter, Juno Beach, Palm Beach Gardens, Jupiter Inlet Colony and nearby neighborhoods, using a slow, methodical process that treats cabinetry more like furniture than like a wall.

Is Painting the Right Call for Your Cabinets?

Refinishing works best when the structure is sound. If the cabinet boxes are square, the doors hang straight and the shelves are not swollen from old leaks, a new painted finish can change the look of a kitchen without the disruption of tearing everything out. Oak, maple, birch and well-built painted MDF all take paint well once prepared.

Painting is a weaker option when the particleboard under the sink has bubbled from water, when thermofoil doors are peeling at the edges, or when you are planning to move appliances and rework the layout anyway. In those cases we will tell you honestly that paint is not going to solve the underlying problem.

Common reasons owners in our area choose to paint instead of replace:

  • Honey-toned oak or cherry that darkens the room
  • A new countertop or backsplash that clashes with the old stain
  • Bathroom vanities that show water spotting and worn edges
  • Preparing a house for sale and wanting a cleaner, neutral kitchen
  • Laundry, garage or built-in office cabinetry that never matched the rest of the home

Protecting Your Kitchen While We Work

A kitchen is the room you most need to keep using, so we plan the job in stages. Doors and drawer fronts are labeled, removed and carried to a dedicated spraying area, which keeps overspray and dust away from your living space. Hinges and pulls go into marked bags so every piece returns to the same spot.

Inside the house we cover countertops with rigid protection, mask appliances, backsplash tile and walls with paper and tape, and lay drop cloths or floor protection along every walkway. Where the cabinet boxes are sprayed in place, we build plastic containment around the work zone and run air filtration. If doors are being finished outdoors or in a garage, we protect landscaping, pavers and parked cars from drift.

Preparation, Step by Step

Cabinet paint fails almost entirely because of prep shortcuts. Kitchen grease is invisible on many surfaces, and paint will not stick to it. Our sequence looks like this:

  • Cleaning: every surface is scrubbed with a degreasing cleaner, then rinsed and allowed to dry fully
  • Scraping: loose finish, drips from previous paint jobs and failed caulk are removed
  • Sanding: the existing sheen is scuffed so primer has something to grip; edges and profiles are hand-sanded
  • Patching: dents, gouges and unused hardware holes are filled with wood filler and sanded flush
  • Caulking: gaps where boxes meet walls, ceilings and crown molding are sealed for a seamless look
  • Priming: a bonding or stain-blocking primer is applied, especially important over oak tannins and knots that bleed through light colors

Choosing Paint and Sheen for Cabinetry

Wall paint is the wrong product for cabinets. We use hard-curing enamels, such as waterborne alkyd or urethane-modified acrylic formulas, which level out smoothly, resist blocking when doors close against frames, and stand up to repeated cleaning. These products also handle the indoor humidity that builds in Florida kitchens when the air conditioning cycles off.

Sheen matters as much as color. Satin is the most popular choice because it wipes clean while hiding minor imperfections. Semi-gloss gives a crisper, more traditional look but shows every brush mark and dent. Matte cabinet finishes are possible with the right product, though they need a gentler cleaning routine. For bathroom vanities near a shower, we lean toward a slightly higher sheen for better moisture resistance.

Two-tone designs, such as a darker island with lighter perimeter cabinets or contrasting upper and lower runs, are common requests. We can sample colors on a door back so you see them in your own light before committing.

How the Finish Coats Go On

Doors and drawer fronts are usually sprayed flat, back side first, with drying time before flipping. Spraying produces the smooth, factory-like surface most people want. Cabinet boxes are either sprayed under containment or brushed and rolled with fine foam or microfiber rollers, depending on the kitchen layout and how much masking is practical.

We apply a primer coat and typically two finish coats, lightly sanding between layers to knock down any dust nibs. Humidity slows curing, so we manage indoor conditions and do not rush reassembly. After the final coat, doors are rehung, adjusted for even gaps, and hardware is reinstalled or replaced with new pulls you have chosen.

What Changes the Cost, and Caring for the Finish

Every kitchen is quoted individually. The main factors are the number of doors and drawers, the overall square footage of cabinet surface, the condition of the existing finish, how much grease and damage must be addressed, whether tall pantry units or upper cabinets near the ceiling require extra access, how many colors are involved, the amount of detailed trim such as crown molding, glass-door mullions or raised panels, and the grade of enamel selected.

Freshly painted cabinets feel dry within a day but continue to harden for a few weeks. During that window, open and close doors gently, avoid hanging damp towels over doors, and clean with a soft cloth and mild soap rather than abrasive pads or strong solvents. Keep bumpers on doors to prevent the paint from sticking to frames, and wipe spills near the sink and stove promptly. Treated this way, a quality enamel finish holds its appearance for many years of normal family use.

Cabinet Painting by city

What to expect

How a visit goes

  1. Honest Assessments

    If a surface needs repair rather than paint, or if a cheaper option will do the job, we say so up front.

  2. Respect for Your Home

    We cover floors, move and wrap furniture, protect landscaping and clean up before we leave each day.

  3. Clear Communication

    You know the schedule, the products we plan to use and what to expect at each stage, including rain delays.

FAQ

Common questions

Don’t see your question? Call (561) 292-1157 and we’ll talk it through.

Do you paint cabinets on site or take them away?

Doors and drawer fronts are removed and finished in a controlled spray area, while the boxes are painted in place under protection. We will explain the setup for your specific home.

Can I use my kitchen during the project?

Usually you will have limited access for part of the job. We schedule the work so the sink and refrigerator stay usable as much as possible.

Will the wood grain show through?

On open-grain woods like oak, some texture remains under paint. If you want a completely smooth look, grain filler can be applied during prep.

Can you paint laminate or thermofoil cabinets?

Laminate can often be painted with the right bonding primer. Peeling thermofoil generally cannot hold paint reliably, and we will tell you if that is the case.

Do you replace hardware?

We reinstall your existing hinges and pulls or install new ones you supply. Filling old holes for different pull sizes is part of prep.

How long before the finish is fully hard?

Enamels cure over several weeks, and humidity can lengthen that. Gentle use during that time protects the finish.

Ready to Talk About Your Project?

Tell us what you want painted and a little about the home. We will set up a visit, look at the surfaces and give you a written plan and quote.

Request Service Call (561) 292-1157
Call (561) 292-1157 Request Service